ZIRCONIA CUTTING TECHNOLOGY

What is “zirconia porcelain teeth”?

  Most of the zirconia discs purchased by the processing factory are in a soft semi-sintered state (semi-finished products), and require the factory to perform cutting and subsequent sintering. Therefore, zirconia porcelain teeth are the digital products produced by the factory in the later stage. The same zirconia disc, from different manufacturers, different equipment, and different processes will also determine the different quality and later stability of the “zirconia porcelain teeth” products.

The influence of processing techniques and equipment on zirconia porcelain teeth:

1. Scanning equipment, design and manufacturing software – scanning accuracy, design data accuracy, needle path direction during machining, force balance during cutting;

2. Cutting equipment/needle – cutting path, crown thickness, edge accuracy, surface smoothness;

3. Sintering equipment – crystal solidification, shrinkage ratio control, density, light transmittance.

The zirconia disc is in the process of cutting.                  The cutting effect of zirconia zirconium discs

Subtractive Manufacturing Center                                           Equipment

  DT DENTURE® over 10 different types of oxide cutting equipment (with four or five-axis linkage and millions of German-made devices), capable of meeting various requirements such as regular crown zirconia, attachments, etc., and is equipped with imported German Deka and Naboo thermal sintering equipment.
  It collaborates with well-known zirconia brands at home and abroad to launch the Zirconia series, including Zhenci·, Zhenci®natura, Germany zirconia, Liangci, Zhi Mei, Qi You Jian, and Yuqi, etc.